Radwag MA 200.3Y Moisture Analyzer Manual de usuario descargar pdf (Pagina 81)

- 81 -

• Assign <Checkweighing thresholds> option to one of the quick access

keys displayed in the bottom bar

• Return to drying mode

• Press < Checkweighing thresholds> soft key and insert the value of

Low Threshold and High Threshold. Return to drying mode.

• After displaying <PREPARE SAMPLE> command, the display, below the

measurement result, indicates a bar graph, which using colours shows

current mass on the drying pan.

• Yellow colour – current mass below set Low Threshold value

• Green colour – current mass within set thresholds values

• Red colour – current mass above set value of High Threshold

2. Defining the value of target mass is carried out using a quick access key

< Target mass >

Procedure

• Press grey coloured workspace, and then <Keys> option

• Assign <Target value> option to one of the quick access keys displayed

in the bottom bar

• Return to drying mode

• Press < Target value> soft key and insert mass to be obtained in

measuring process,

• Then, insert +/- percent tolerance of the target mass, (accessible range

0 – 100%)

• The display, below the measurement result, indicates a bar graph

which contains:

o Current mass (visualized with colours)

o Target Mass value (visualized with black marker)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 169 170

Sin comentarios

Radwag MA 200.3Y Moisture Analyzer Manual de usuario Pagina 81