Radwag PUE C41H Indicator Manual de usuario descargar pdf (Pagina 35)

- 35 -

14.2. ETHERNET setting

ETHERNET can be configured in <P2.4 ETHERNET>.

Inventory of default parameters:

No NAME VALUE DESCRIPTION

P2.4.1

WORK MODE SERVER, CLIENT

Ethernet connection as Server or Client.

SERVER – scale waits for connection

CLIENT – scale initiates the connection

to a HOST.

P2.4.2

IP ADDRESS 192.168.0.2 Setting an IP address.

P2.4.3

SUBNET MASK 255.255.255.0

Setting a subnet mask for Ethernet

connection.

P2.4.4

GATEWAY 192.168.0.1

Setting a gateway for Ethernet

connection.

P2.4.5

LOCAL PORT 4001

Setting a local port for Ethernet

connection. Only for devices that

work as SERVER. Servers waits

for connection on the specified port.

P2.4.6

HOST IP 192.168.0.3

Setting a host IP address (IP of a device

to connect with). Applicable only for

devices configured as CLIENTs.

P2.4.7

HOST PORT 2000

Setting a Host port (a port for connection

with a computer). Applicable only for

devices configured as CLIENTs.

P2.4.8

TIMEOUT 60

Time (in seconds) after which none-

active Ethernet connection is being

broken. Set to 0 to stop breaking the

connection.

Caution:

1. For appropriate setting of: <P2.4.2 IP ADDRESS>,

<P2.4.3 SUBNET MSK>, <P2.4.4 GATEWAY> contact

the supervisor of the net to connect with;

2. The way of connection via ETHERNET to the program

EDYTOR WPW is described in chapter 32.2.3.

3. The scale does not allow the automatic fetch of net

configuration from DHCP servers.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 162 163

Comentarios a estos manuales

Sin comentarios

Radwag PUE C41H Indicator Manual de usuario Pagina 35

Comentarios a estos manuales