Radwag MYA 5.3Y.F1 Microbalance Manual de usuario descargar pdf (Pagina 118)

- 118 -

26.1. Working mode activating procedure

Procedure:

• While in the main window, press soft key located in the upper bar of the

display, which opens a submenu <Working modes> with selection of

available working modes,

• select < SQC>, mode, the software automatically returns to the main

window and displays pictogram in the upper bar,

• simultaneously, the message bar displays a command <Start control > and

a soft-key on control start is visible in the bottom tool bar:

Start control

Control start procedure:

• Starting a control process requires logging a user with corresponding access

level.

Caution:

1. Starting a control requires that an access level of the logged user is at

least a <user>. If a logged user or an anonymous user have access level

set to <guest> then on control start the software opens a message box

informing on: <Unauthorized access>.

2. Logging procedure is described in point 9 of this user manual, and

procedure determining access level for each user is provided in point 13 of

this user manual.

• Set general settings of working mode parameters to balance memory

< SQC>, description in point 26.2,

Select an appropriate product (by pressing a corresponding soft key

< > in the bottom bar or using balance’s keyboard) with correctly entered

data on a control:

Caution:

Data on a product, listed in the below table, have to be filled in before

starting a control:

Mass Nominal mass of a product

Tare Packaging mass in the adjustment unit

Min Value of –T1 error (specified in % of nominal mass)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 197 198

Sin comentarios

Radwag MYA 5.3Y.F1 Microbalance Manual de usuario Pagina 118